technical data datasheet 5 324 , rev - ? 2013 sensitron semiconductor ? 221 west industry court ? deer park, ny 11729 - 4681 phone (631) 586 7600 fax (631) 242 9798 ? www.sensitron.com ? sales @sensitron.com sda100 1 ss diode array ? each leg has two 1n5806 diodes for redundancy ? die manufactured on qualified jans line ? devices are serialized ? built and screened to space level quality ? space quality level conformance testing is performed on each lot max. ratings / electrical characteristics all rating at are t a = 25 o c unless otherwise specified rating symbol max unit peak inverse voltage (dc) piv 3 00 v average dc output current per leg * t a = 55 o c t a = 100 o c i o 1.0 0.75 a p eak single cycle surge current per leg ** (tp=8.3ms single half - sine wave ) i fsm 10 a max. operating junction temperature t j - 55 to +150 o c max. operating ambient temperature t op - 30 to 100 o c storage temperature range t stg - 65 to +175 o c maximum forwar d voltage @ 1 a v f 2.0 v maximum instantaneous reverse current at rated (piv) t a = 25 o c t a = 100 o c 1 50 ? a max. reverse recovery time i f =0.5 a, i r = 1.0a, i rr =0.25a t rr 25 ns thermal resistance junction to case ? jc 13 o c/w note * - total current is p ackage dissipation limited to 3a note ** - surge rating is limited by package wirebond electrical schematic pin 1
technical data datasheet 5 324 , rev - ? 2013 sensitron semiconductor ? 221 west industry court ? deer park, ny 11729 - 4681 phone (631) 586 7600 fax (631) 242 9798 ? www.sensitron.com ? sales @sensitron.com sda100 1 ss mechanical outline disclaimer : 1 - the information given herein, including the specifications and dimensions, is subject to change without prior notice to impro ve product characteristics. before ordering, purchasers are advised to contact the sensitron semiconductor sales department fo r the latest version of the datasheet(s). 2 - in cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by usi ng semiconductor devices that feature assured safety or by means of users fail - safe precautions or other arrangement . 3 - in no event shall sensitron semiconductor be liable for any damages that may result from an accident or any other cause durin g operat ion of the users units according to the datasheet(s). sensitron semiconductor assumes no responsibility for any intellectual proper ty claims or any other problems that may result from applications of information, products or circuits described in the data sheets. 4 - in no event shall sensitron semiconductor be liable for any failure in a semiconductor device or any secondary damage resulti ng from use at a value exceeding the absolute maximum rating. 5 - no license is granted by the datasheet(s) under any p atents or other rights of any third party or sensitron semiconductor. 6 - the datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of sensitron semiconductor. 7 - the products (technologi es) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any th ird party. whe n exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulat ions. .005 +.003 -.001 .450 .012 .038 .008 .125 max .015 .005 pin 1 .050 .015 .400 max .285 max
|
